THERMALTAKE
Refine Search
Computer Hardware
- Computer Cases Casing
- Memory RAM
- Power Supply
- It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while preventing the entire cooling system – copper, brass, nickel, aluminum, and steel – from corrosion.
- Fill the reservoir with coolant and cycle the power on and off several times while the pump pushing the coolant into the loop.
- DO NOT let the pump run dry, when there is no liquid entering the pump turn off your power immediately
- Fill the reservoir to the top as it will prevent air from going into the pump
- If necessary tilt the system slightly from side to side to bleed the air out of the loop.
- Place some paper towels under fittings and joining points to test for leaks.
- Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop
RM155.00
- Built for Makers
- Fully Modular Concept
- 3-Way Placement Layout
- Panoramic Viewing
- Supreme Liquid-Cooling Support
- Versatile GPU & PSU Orientation
- AIO Bracket (Optional)
RM530.00
- Unprecedented two-way heat dissipation of liquid cooling or heatsinks convection
- 16.8m colors with TT RGB PLUS software, TT AI Voice Control, Amazon Alexa, and Razer Chroma synchronization support
- 5V motherboard RGB software enabled
- RAM details: 3200 MHz, CL16, Hynix C-die
- Intel XMP 2.0 Ready
- Limited Lifetime Warranty for RAM
RM559.00
- Unprecedented two-way liquid cooling or heatsink convection heat dissipation options
- 16.8M RGB color across 12 super-bright addressable LEDs for stunning RGB illumination
- 10-layer PCB construction for enhanced overclocking performance and stability
- TT RGB PLUS, TT AI Voice Control, Razer Chroma, and Amazon Alexa RGB sync compatible
- 5V Motherboard RGB sync ready
- Intel XMP 2.0 Ready
- Limited Lifetime Warranty for RAM
RM979.00
- Riing 12 RGB High Static Pressure LED Radiator Fan (Three fans pack)
- Patented Design
- Smart Fan Controller
- Concentrated Compression Blade
- Hydraulic Bearing with Low-Noise Design
- Wind Blocker Frame
- Anti-Vibration Mounting System
RM189.00
- Switch LED Modes with ARGB Controller
- 16.8 Million Colors LED Design
- 9 Fan Blade Design
- Hydraulic Bearing with Low-Noise Design
- Anti-Vibration Mounting System
- 2 Years Local Manufacturer Warranty
RM169.90
- Switch LED Modes with ARGB Controller
- 16.8 Million Colors LED Design
- 9 Fan Blade Design
- Hydraulic Bearing with Low-Noise Design
- Anti-Vibration Mounting System
- 2 Years Local Manufacturer Warranty
RM149.00
- It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while preventing the entire cooling system – copper, brass, nickel, aluminum, and steel – from corrosion.
- Fill the reservoir with coolant and cycle the power on and off several times while the pump pushing the coolant into the loop.
- DO NOT let the pump run dry, when there is no liquid entering the pump turn off your power immediately
- Fill the reservoir to the top as it will prevent air from going into the pump
- If necessary tilt the system slightly from side to side to bleed the air out of the loop.
- Place some paper towels under fittings and joining points to test for leaks.
- Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop
- Before starting, flush out your system correctly to prevent any coolant or unwanted particles sticking to your tubes, radiators and other cooling components.
- Coolant might fade over time.
RM105.00
- Tt LCS Certified
- High-flow and Leak-freeDesign
- Remarkable Expansion
- 2 years Local Manufacturer Warranty
RM39.00
- SERIES Level 20 CASE TYPE Mid Tower DIMENSION (H X W X D) 455 x 204 x 471mm
- (17.9 x 8.0 x 18.54 inch) NET WEIGHT 6.75 kg / 14.88 lb SIDE PANEL 4mm Tempered Glass x 2 (Left & Front) COLOR Exterior & Interior : Black MATERIAL SPCC COOLING SYSTEM Front (Intake):
- 120 x 120 x 25mm Addressable RGB fan
- (1000rpm, 27.2 dBA) x 3
- Rear (exhaust):
- 120 x 120 x 25 mm fan
- (1000rpm, 26 dBA) x 1 DRIVE BAYS
- -ACCESSIBLE
- -HIDDEN
- 1 x 2.5’’(HDD Bracket); 2 x 2.5”
- 2 x 3.5’’ or 2.5”(HDD Cage); 1 x 2.5”(HDD Bracket) EXPANSION SLOTS 7 MOTHERBOARDS 6.7” x 6.7” (Mini ITX), 9.6” x 9.6” (Micro ATX), 12” x 9.6” (ATX) I/O PORT USB 3.0 x 2, HD Audio x 1, RGB Switch x 1 PSU Standard PS2 PSU (optional) FAN SUPPORT Front:
- 3 x 120mm
- Top:
- 2 x 120mm, 1 x 140mm
- Rear:
- 1 x 120mm
- Right Side(In front of M/B Tray):
- 2 x 120mm
- Bottom(On the power cover):
- 2 x 120mm RADIATOR SUPPORT Front:
- 1 x 360mm
- Rear:
- 1 x 120mm
- Right Side(In front of M/B Tray):
- 1 x 240mm CLEARANCE CPU cooler height limitation:
- 170mm
- PSD length limitation:
- 170mm
- VGA length limitation:
- 260mm(With radiator on the right side)
- 366mm(Without radiator on the right side)
RM326.00
- Ultra Quiet Fan
- Cables with High Flexibility
- High-Quality Components
- Massive and Dedicated +12V Output
RM139.00
- Thermaltake Litepower 550W (230V)
- Cables with High Flexibility
- High-Quality Components
- Massive and Dedicated +12V Output
- 2 Years Warranty
RM149.00
- 2 Years Warranty
- Ultra Quiet Fan
- Cables with High Flexibility
- High-Quality Components
- Massive and Dedicated +12V Output
RM157.00
- To ensure a clean loop, flush and rinse your radiators and water blocks with distilled water prior to use.
- Do not use tap water or distilled water as your coolant, it may harm your loop and reduce performance.
- It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while protecting the entire liquid loop from corrosion.
- Before storing your water cooling components, please clean, rinse and dry. This will ensure a longer lifespan for your components.
- It is strongly recommended to use market proven pre-mix coolant, such as Thermaltake Coolant 1000. It offers great performance while preventing the entire cooling system – copper, brass, nickel, aluminum, and steel – from corrosion.
- Fill the reservoir with coolant and cycle the power on and off several times while the pump pushing the coolant into the loop.
- DO NOT let the pump run dry, when there is no liquid entering the pump turn off your power immediately
- Fill the reservoir to the top as it will prevent air from going into the pump
- If necessary tilt the system slightly from side to side to bleed the air out of the loop.
- Place some paper towels under fittings and joining points to test for leaks.
- Run the loop with the fill port open for about 24 hours to completely bleed the air out of the loop
- Before starting, flush out your system correctly to prevent any coolant or unwanted particles sticking to your tubes, radiators and other cooling components.
- Coolant might fade over time.
RM97.00
- Tt LCS Certified
- Driven Performance
- Heat-resistant Acrylic Tank
- Easy and Flexible Application
- 2 Years Local Manufacturer Warranty
RM615.00